The most critical one for speed-related issues is a circle that is drawn outside a square. There are a number of parameters measured by the ILDA Test Pattern. What is the correct use of the ILDA Test Pattern? For example, a 30K scanner should be tuned at approximately 8-degress optical or less. If you ever manage to understand how from the cryptic user manual.The “ILDA Test Pattern” was created to ensure a user is able to accurately tune their laser scanners to the standard in which ILDA has specified. The built-in or SD-Card patterns can be played and tweaked. That's all I needed for my current project but there are a lot of effects available via DMX. Channel 9 controls the horizontal position and speed (depending on value) of the displayed pattern.Ĭh9: 140 (moderate left to right repeated translation) Then I needed to have the pattern moving from left to right repeatedly at a moderate speed. Then I needed to zoom out the displayed pattern, which can be done with Channel 11. I finally set the projector to the DMX13ch then selected the SD-Play menu and managed to get my EFFEC001.eff file playing by setting the following channels:Ĭh 1: 150 (manual mode: Ch3 will select a file in a)Ĭh3: 0 (index of entry of a to play - 1) * 10 I then spend a lot of time tinkering with the projector DMX settings and trying hard to understand this very cryptic "user manual". I used this FTDI USB to DMX adapter and it was automatically recognised as a USB DMX Interface by Q Light Controller , the great free DMX Softfware I'm using. To manually play this file, use the projector menu to navigate to the SD-Play mode and select something like 'single file' and the playlist line number to play. ild file(s) and automatically repeat at the end of the playlist: This "Effect list" file must then be added to the a file.Įach line has a unique incrementing line number, followed by the "effect list" file to play.įor instance, this would play our. ild file to play in sequence, prefixed by a unique incrementing line number.Īssociated to each files is a set of parameters (effects applied by the projector when playing the file) roughly described in the projector manual.įor instance, to display our birdfly.ild for 5 sec we'd have a file such as EFFEC001.eff containing an entry such as: The file name must be unique and the file contains one line per. So let's say my custom file is birdfly.ild The file name must not be longer than 8 characters (hello MS-DOS! :) ) and must only contain ASCII characters, otherwise they won't be seen by the projector firmare. ild files must be on the SD-CARD, in the PESLADER\ildfiles folder (or any folder referenced later)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
September 2023
Categories |